Wanhao Duplicator D9 Mark 2 – printer højdepunkter:
- Byggeplade 300x300x400mm
- Opvarmet byggeplade
- Stor touch display i farver
- Intuitive instruktioner på displayet
- Velkendt MK10 ekstruder med direct drive
- Kan samles på 10 min., hvorefter den er klar til at 3D printe
- Cura software inkluderet, kompatibel med Simplify3D
- Automatisk bed nivelleringssensor til perfekt nivelleret byggeplade
- Magnetisk bygningsoverflade
- Genoptag udskrivningsfunktionen
Technical Specifications:
Primary attributes of the technology | PLA printer, entrance level printer. Full assembled. Developped from Prusa i3. |
Software | CURA, host by Repitator, Simplify 3D |
Extruder system | MK10 extruder with full metal hot end |
Material support | PLA, PVA, PEVA, PLA, Nylon, Any material melting<=300’C |
Max printable area | 300*300*400mm |
Filament diameter | 1.75mm |
Max printing speed | 70mm/s |
Case Material | Aluminum Case |
With Insulate cover or not | Insulate Tent Available |
Extruder Quantity | 1 |
Accuracy | X 0.012mm Y 0.012mm Z 0.004mm |
Net Weight(kg | 20kg |
Gross Weight(kg) | 22kg |
Packing size(cm) | 60*50*35cm |
Bed leveling | 4 Points leveling |
Platform Holder | Steel frame holde |
Rail locking system | Steel bolt locking frame |
Layer Thickness | 100 micron- 400 micron |
Platform | Aluminium plateform W/ heating |
Resume printing | Can resume printing after power break |
LCD display | English/Chinese/ |
Power supply unit | Included EU German & UK Power supply |