Original Prusa Curing and Washing Machine (CW1)

4.740,00 DKK  Ekskl. moms

Original Prusa Curing and Washing Machine (CW1) er et standalone og anbefalet tilbehør til den Originale Prusa SL1.

CW1 er en multi-funktionel enhed, som tager sig af både før 3D print og efter 3D print opgaver såsom:

  • Opvarme resin før 3D print
  • Vaske og Tørre efter 3D print
  • Hærde den 3D printede model når færdig.

Denne multi funktionelle maskine godt bygget ramme og smarte design gør Resin 3D print meget nemmere og effektivt gennem hele processen.

Originalt fra PRUSA research med dansk garanti og 14 dages returret ved uåbnet. 

Se også vores 3D print kursus for begyndere

LEVERINGSTID 1 Uge

Estimated Delivery Date februar 25, 2020

PRUSA Research FDM 3D printere har vundet utallige priser og nu har de også kastet sig over SLA teknologien i deres nye SL1 3D printer.

Her er beskrivelsen fra PRUSA på deres Curing og Washing maskine CW1

Original Prusa Curing and Washing Machine (CW1)

Original Prusa Curing and Washing Machine (CW1) is a standalone and recommended accessory for the Original Prusa SL1.

The CW1 is a multi-purpose device, which takes care of pre-printing and post-processing tasks: preheating the resin before printing, and also washing, drying and curing the printed model. This all-in-one device with well-built compact body with smart design makes resin 3D printing a much more comfortable and efficient process.

Objects printed from liquid resin are usually a bit soft and sticky. To clean them and give them optimal surface properties, the objects need to be washed, dried and cured. This process involves washing the object in isopropyl alcohol, drying using hot air and curing using UV light. The Original Prusa Curing and Washing Machine (CW1) can take care of all these actions in 10 minutes.


MAIN FEATURES

The most significant features of Original Prusa CW1

RESIN PREHEAT (coming soon)

Resins tend to change their state while being stored, that is the reason to shake the bottle with resin well before printing. However, CW1 can also preheat the resin before printing it, thus getting it to the ideal printing temperature and state for the best performance of the SL1 and the resin itself. We are just testing this feature which is to become available in the upcoming firmware update.

WASHING

The finished print has to be washed to remove the uncured resin from its surface. CW1 uses a stainless steel tank for isopropyl alcohol and a magnetic propeller. The magnetic propeller movement stirs the liquid, so it gets to every part of the model. This method is less aggressive compared to ultrasonic cleaning and works very well even with very small objects.

DRYING

Drying a washed model is yet another feature of the multipurpose CW1. Before the washed model is cured with UV-light, it has to be dried in order to avoid resin residue stains.

CURING

Curing the model with UV-light is an essential part of the resin printing process. Printed objects are usually soft, so treating them with UV light gives them optimal surface properties.

SMART DESIGN

CW1, unlike most of the other resin printing accessories, combines 4 important features in a single device. Even though it’s a multi-purpose device, it’s very compact (smaller than the SL1) and saves you a lot of space in your workshop.

EASY TO USE

CW1 was designed with user comfort in mind. The IR sensor detects whether the liquid container is present in the device and displays the set of functions to choose from accordingly. CW1 simply knows what steps to take in advance 🙂


SPECIFICATIONS

TECHNICAL PARAMETERS

  • 4 UV LED strips to cure the printed models
  • UV LED wavelength: 405 nm
  • Max power of the UV LED: 52,8 W
  • EEE group: 3 (IT and/or telecommunication equipment)
  • Power supply: Input 100-240VAC, 50/60Hz, 2.0A. Output: 24V, 6.67A, 160W
  • Average power consumption: 130W
  • Max. working temperature range: 16 °C – 38 °C, indoor use only
  • Working humidity: 85 % or less
  • CW1 dimensions: 21.8 x 34.5 x 23.2 cm (D×H×W)
  • CW1 box dimensions: 39 x 46 x 40 cm (D×H×W)

LIST OF FEATURES

  • Resin preheat (coming soon)
  • Washing using magnet driven propeller to create a vortex and wash resin residue from the print
  • Dries the print after washing is done
  • Cures the print using 4 UV LED strips
Bemærk at Resin der ikke er 100% naturligt baseret kræver udluftning under print.

 

Yderligere information

Vægt18000 g

Du kunne også være interesseret i...

  • 3DE PLA filament 1.75mm – vælg farve

    Fra 118,40 DKK  Ekskl. moms