LASERBOT-1

Laserbot Makeblock

2.800,00 DKK ekskl. moms

Features

• Simple but solid H-shaped structure;

 

• High-precision anodized aluminum alloy;

 

• Arduino compatible;

 

• User friendly software;

Vil du ha rabat? Så bliv medlem ved at købe Stor pakke, eller log in hvis du er medlem.

Produktbeskrivelse

Want create site? Find Free WordPress Themes and plugins.
LaserBot is a desktop laser engraver developed on Makeblock’s open-source platform. Equipped with 1.6W 445nm high power solid-state lasers, and cooperating with its software mLaser, LaserBot can easily engrave and cut many things for you, and help you to make surprises in daily life. For instance, making Christmas cards/birthday cards for your families, or engrave your honeymoon photos on the wood for decoration, etc.

Engraving graphic display

LaserBot uses a beam of light to cut, engrave, and shape designs from a variety of materials.

Capability:
1. 1.6W 445nm semiconductor and Solid laser: The rotation speed of its high power laser head can reach up to 200mm/s, so that LaserBot is twice as efficient as XY Plotter (with Laser Engraver Upgrade Pack) . You will save more time to realize your ideas! 2. Megapi: The powerful mainboard MegaPi brings you unprecedented experience of laser engraving. It not only has superpower to control various motors, but also very easy to use. Moreover, you can also combine it with Raspberry Pi to explore more.
 
3. High-precision: Up to 0.1mm, carefully engraves every details. 4. Engraving area: Up to 383mm×367mm
 
 

Software:

mLaser: This is a new software for LaserBot, our DIY laser cutter. It includes both simple mode and expert mode for different levels of users. Also we simplified the operation and setting procedure to save more time. Therefore, it is so user friendly that everyone can use to control LaserBot.

 

Safety:

Goggles: Specifically designed Goggles for LaserBot to protect your eyes during laser engraving.

Velcro sticker pad for Laser head: In order to avoid excessive scattering of laser, we specially designed Velcro sticker pad for Laser head. Only one step needed to install the Velcro sticker pad to laser head.

WARNING

Wavelength γ= 445nm blue-violet diode laser

DO NOT directly irradiate eye or skin by the laser beam.

 

WARNING: As laser energy gains higher density, make sure corresponding protection measures are taken while using.

• No direct eye-contact with the laser light path;

• DO NOT irradiate others by the laser;

• Keep away from children and other people who are not familiar with laser usage;

• When the laser is used, take eye protection measure;

• When certain materials are cut by the laser, it is possible for them to produce toxic smoke, take ventilation measures.

 

 

Comparison to XY Plotter
(with Laser Engraver Upgrade Pack)

If you’re trying to figure out the difference between LaserBot and XY Plotter (with Laser Engraver Upgrade Pack), check this comparison chart.

LaserBot

XY Plotter
(with Laser Engraver Upgrade Pack)

Main Control Chip ATMEGA2560-16AU Arduino Uno
Extension Ports 1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Slide
4.MegaPi (Controller)
5.Stepper Motors
6.MegaPi Stepper Motor Drivers
7.1.6W 445nm High-Power Solid State Laser
8.Micro Switch
9.Cables
10.Other Hardware and Accessories
1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Shaft 4.D8×496mm Linear Motion Slide Unit 8mm
5.Makeblock Orion(Controller)
6.Stepper Motors
7.Stepper Motor Drivers
8.9g Micro Servo Pack
9.500mW 405nm High-Power Solid State Laser
10.Micro Switch
11.Cables
12.Other Hardware and Accessories
Electronics MegaPi (Controller) Makeblock Orion(Controller)
Laser 1.6W 445nm High-Power Solid State Laser 500mW 405nm High-Power Solid State Laser
Communication USB Type B Micro USB
Software mLaser mDraw & Benbox
Supports file type *PNG, *JPG, *BMP, *SVG, *DXF SVG(mDraw) JPG, PNG, BMP, GIF, DXF(Benbox))
Power Supply 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A 100-240 V~50/60Hz AC/DC Power adapter, 12V/3.0A

Specifications

Frame Anodized aluminum
Physical Dimensions (L×W×H) 535mm×637mm×184mm
Working Area (X×Y) 383mm×367mm
XY Accuracy 0.1mm
Maximum Working Speed 200mm/s
Noise Level Low noise
Power 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A
Mainboard MegaPi (Arduino & Raspberry Compatible)
Connections USB
Net Weight 3.87kg
Gross Weight 4.475kg
MEAS 562mm×336mm×90mm
Software mLaser
Supported File Types *PNG, *JPG, *BMP, *SVG, *DXF

 

Laser Technical Specification

Product Dimension Φ33mm X 79mm
Output Power 1.6W
Best Engraving Distance 20-50mm
Light Spot Precision ≤1mm
Focus Mode Adjustable Focal Distance
Damage Ratio of Lens 10%
Actual Light Power 1.3W
Wavelength 445nm
Operating Voltage DC 12V ± 30%
Operating Current 600mA
Diameter Of Beam 5mm
Light Spot | Divergence Angle ≤1°
Light Spot | Concentricity ≤0.02°
Continuous Working Hours ≤5h
Operating Life 6000 Industrial Hours
Engraving Materials Dark Flammable Objects
Laser Level IV (Caution: DO NOT directly irradiate eye or skin with the laser beam over 50mW.)
Operating Temperature -40℃ ~ 50℃
Storage Temperature -50℃ ~ 60℃

 

Processable Material

Material Cuts Engraves
Paper YES YES
Cardboard up to 0.8mm YES
Wood Board up to 0.6mm YES
Rubber Sheet up to 0.5mm YES
Foam Paper up to 3mm Engraves
Dark Colored Cloth (denim cloth,
cotton cloth and linen)
up to 1mm YES
Non-Transparent ACRYLIC ※1 YES
Plastic Sheet ※2 YES
Urethane Sheet up to 0.8mm YES
Mirror NO NO
Glass NO NO
Ceramic NO ※3
Aluminum NO NO
Steel NO YES
Stainless NO NO
※1. Opaque black acrylic only ※2. Gray plastic plate only ※3. Peeling of anodized only
Did you find apk for android? You can find new Free Android Games and apps.

Yderligere Information

Vægt 5500 g